| |
| |
-
ENGL 3352 - Women’s Narratives A study of historic and contemporary narrative writing by women.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 3371 - The American Novel A variable content course which examines the emergence and development of the American novel.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 3373 - Modern and Contemporary American Poetry Study of themes and forms prevalent in modern American poetry from the turn of the 20th century.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 3375 - Women and Film A study of the depiction of women in American and international films, from popular movies and the avant garde, by both female and male filmmakers.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 3377 - Hispanic Women Contemp Film/Lit A survey of the contributions Hispanic women have made in literature and film.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 3381 - Fundamentals of Theory and Criticism Study of literary theories and their application in critical practice.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 3999 - Special Topics in Literature Study of topics not otherwise available.
Credits: 1-3
Lecture hours: 1-3
|
| |
-
ENGL 4410 - Chaucer/Lit of the Middle Ages A study of Geoffrey Chaucer’s Canterbury Tales in relation to other literature of the Middle Ages.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4411 - Renaissance Literature A consideration of major authors and works of the period.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4421 - 17th Century Literature Study of the major works of selected authors such as Bacon, Carew, Cowley, Donne, Herrick, Jonson, Marvell, Webster, and Milton.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4424 - 18th Century British Literature A consideration of major works and authors of the period.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4434 - Mthds Teach Lang Arts Sec School Provides preservice teachers with essential experiences in theory and practice for teaching language arts students, ages 12 through 21. Instructional strategies and design, classroom management, differentiated learning needs, and implementation are addressed in field and clinical practice.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107 and admission in Teacher Ed. Seniors Only.
Coreq: EDAE 4400
Lecture hours: Formula
Course/lab fee: $
|
| |
-
ENGL 4441 - The Romantics Study of the poetry and prose of major Romantic writers, including Blake, Wordsworth, Coleridge, Shelley, Byron, and Keats.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4446 - The Victorians Study of English poetry and prose from 1830 to 1900.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4461 - 19th Century American Literature Intensive study of major authors and works of the 19th century.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4471 - 20th Century American Literature Intensive study of major authors and works of the 20th century.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
|
| |
-
ENGL 4472 - 21st Century American Literature An advanced course that examines American literature written in the present century and considers it within broader literary, historical, and/or cultural movements. In addition to primary texts, students will read relevant criticism and theoretical essays.
Credits: 3
Prereq: ENGL 1105 or ENGL 1106
Lecture hours: 3
|
| |
-
ENGL 4483 - Graphic Novels and Animation This course offers an introduction to the study of graphic novels and animation from a comparative perspective. The materials presented in this course cover a diversity of materials, including animated films, from different cultural and national traditions.
Credits: 3
Prereq: ENGL 1101 or ENGL 1102, and ENGL 1105
Lecture hours: 3
|
| |
-
ENGL 4485 - Senior Exp English/Hum Majors Students examine in detail a selected topic of the instructor’s specialty. A major research essay and oral presentation are required. Part of the course involves a portfolio review of previous writings in other courses.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
Lecture hours: 3
General Education Program Course GEP
|
| |
-
ENGL 4495 - Independent Study Independent investigation of literary topics under the direction of a faculty member.
Credits: 3
Prereq: ENGL 1105 or ENGL 1107
|
| |
-
ENGL 4999 - Special Topics in Literature A seminar course in selected topics in literature. Specific topic chosen by the instructor.
Credits: 1-3
Lecture hours: 1-3
|
| |
-
ETCA 1101 - Introduction to Mechanical Drafting A basic course for students having little or no experience in engineering drawing. Develops fundamental principles through actual experience in both freehand sketching and scaled machine drawings. Includes orthographic, multiview drawings, geometric constructions, dimensioning practice, sectional views, auxiliary views, threads and fasteners.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 1201 - Introduction to CADD (CX) A basic course for students having little or no experience in engineering graphics. This course develops fundamental skills and principles through actual experience using CADD workstations to make engineering drawings. Students will apply the skills of setting-up, editing, and plotting engineering drawings. Fundamental topics will include ANSI drafting standards of orthographic projection, geometric constructions, dimensioning practices, sectional views, and auxiliary views. The Microsoft Windows operating environment and AutoCAD software will be utilized.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 1202 - Intermediate CADD with Design Additional commands and more advanced techniques are introduced involving typical 2D mechanical drafting and design using AutoCAD software. Exposure to detail and assembly drawings, parts lists, thread details and specifications, gear details, classes of fit and tolerancing. More advanced techniques including layouts, advanced dimensioning, use of blocks and external references will be applied.
Credits: 3
Prereq: ETCA 1201
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 1301 - 3-D Parametric Modeling (CX) Introduction to 3-D solid modeling, using feature-based parametric modeling applications. Students create complex solid models and assemblies from basic 2-D sketches using parametric dimensioning and constraints. Part models and assemblies are used to generate 2-D detail drawings, assembly drawings, and 3-D animations. Basic drafting standards will be addressed.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 1302 - Intro to BIM Using Revit Arch. The course centers on learning the methods to produce a complete set of project documents. You will produce a Revit BIM Term Project of a building.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 1999 - Topics in CADD Offered as an elective for CADD students. Covers topics of special interest.
Credits: 1-3
Prereq: Faculty Consent Required
Course/lab fee: $
|
| |
-
ETCA 2102 - Mechanical Drafting 2 with Descriptive Geometry Advanced skills will be developed using principles of descriptive geometry. Includes detail and assembly drawings, parts lists, thread details and specifications, gear details, classes of fit and tolerances, and geometric dimensioning and tolerancing. A design project will be required.
Credits: 3
Prereq: ETCA 1101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2201 - Small Building Design Introduction to architectural drafting through the design of a residential structure. Students create the drawings necessary to complete a typical set of house plans using Autodesk software. Topics include, but are not limited to, design techniques, floor plans, foundation plans, elevations, wall sections, window and door schedules. You will update your multimedia portfolio to be completed in CADD Presentation 2.
Credits: 3
Prereq: ETCA 1101 and ETCA 1201
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2203 - Welded Parts Design w/CADD Welding processes and procedures are covered to the extent necessary to make production weldment drawings. Delineating weld symbols is emphasized.
Credits: 3
Prereq: ETCA 1101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2204 - Casting and Mold Design w/CADD Completion of a set of plans giving the specifications a foundry would need to manufacture a part. The plans include: a pattern drawing with grates, a core box drawing, the casting drawing of the part, and machined part drawing.
Credits: 3
Prereq: ETCA 1101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2206 - Pipe Drawing w/CADD Representation of piping in single and double line diagrams, isometric and orthographic diagrams. Design of pipe flanges given the size of pipe and the operating pressure. Template layouts for cutting pipe to form turns of various angles.
Credits: 3
Prereq: ETCA 1101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2301 - Advanced 3-D CADD Design Solid modeling, surface modeling, 3D wire frames and rapid prototyping will be addressed. Students gain an appreciation for the capabilities and limitations of each modeling technique using industry standard software.
Credits: 3
Prereq: ETCA 1201 or ETCA 1301, or Instructor Permission
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2401 - Computer Aided Mach/Mach Tools Introduction to machine tools, Computer Aided Machining (CAM) and (CNC). Intended for students with no prior experience in machining. The basics of metal chip-making technology as well as creation and editing of tool path geometry, display control, file manipulation, verification of data, and output of CNC code. Topics include safety, measurements, bench work, drilling, turning, shaping, planning, milling, and grinding. Properties and uses of ferrous and non-ferrous alloys, cutting fluids, welding, foundry practices, CAM, CNC programming, and CNC machine tool operations. Laboratory experiences include chip-making process and tooling methods, manual and automated. CADD majors will update their multimedia portfolios to be completed in CADD Presentation 2.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2402 - Computer Aided Machining 2 Intermediate CAM. Learn more advanced CAM programming, island pocketing, surface tool paths, parallel tool paths, radial tool paths, flowline tool paths, draft and fillet tool paths, and rough and finish tool paths. Also, learn to read in and work with models created in CAD programs. Lab experiences include CAM, CNC programming, and CNC tool operation.
Credits: 3
Prereq: ETCA 2401
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2601 - Prototyping and 3D Printing This course will cover a brief history and development of traditional prototyping and rapid prototyping technology. There will be hands-on labs to build traditional architectural models and mechanical part design. 3D CADD technology will be utilized to design mechanical parts and produce prototypes utilizing traditional methods and 3D printing technology. Students may concentrate on either architectural or mechanical designs. Additive manufacturing concepts will be introduced.
Credits: 3
Prereq: ETCA 1301
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCA 2999 - Topics in CADD Offered as an elective for CADD students. Covers topics of special interest.
Credits: 1-3
Prereq: Faculty Consent Required
Course/lab fee: $
|
| |
-
ETCO 1001 - Technical Portfolio Development This course is designed for the student interested in developing a portfolio for submission and review for college credit. The student will work with his/her advisor in the development of the portfolio.
Note: Course offered on demand with the recommendation of the chairperson of the Department of Engineering Technologies and with the approval of the Dean, College of Professional Studies.
Credits: 1
Lecture hours: 1
|
| |
-
ETCO 1115 - Comp Programming for Technology (CX) Introduction to computer hardware, a high level programming language, an integrated development environment, control structures, procedures, functions, and graphical user interface (GUI) concepts to develop computer programs for various applications. Focus is on problem solving and algorithm development and analysis.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCO 1116 - JAVA Computer Programming Introduction to computer hardware, a high level programming language, objects, methods, control structures, and graphical user interface (GUI) concepts to develop computer programs for various applications. Course focus is on problem solving and algorithm development and analysis.
Credits: 3
Course/lab fee: $
|
| |
-
ETCO 1120 - Intro STEM Computer Programming (CX) The areas of Science, Technology, Engineering, and Mathematics (STEM) all rely on computer programming and this reliance is steadily increasing. This course introduces students to computer software created to meet the computing needs of these areas. The use of computer-based analytical and computational software as well as beginning-level computer programming is taught in a manner which emphasizes problem solving. No previous programming experience is needed to enroll in this course but an understanding of algebra is required.
Credits: 3
Coreq: MATH 1020
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCO 1130 - Software Tools for Technology (CX) Utilization of computer hardware and a high level programming application (Mathcad) to create worksheets, functions, 2D and 3D plots, graphics and interactive operations to develop computer programs for technology applications.
Credits: 3
Lecture hours: 3
Course/lab fee: $
|
| |
-
ETCO 1150 - HTML Programming/Web Page Design Utilization of computer hardware and a high level programming application (HTML) to design and construct interactive web pages. Topics include Internet browsers, HTML programming language, graphics and file management, shareware, guest books and forms, and JAVA applets.
Credits: 3
Lecture hours: 3
Course/lab fee: $
|
| |
-
ETCO 1310 - Fluid Power A study of the functions of various hydraulic and pneumatic components and methods of combining them to build complex systems. Emphasis on understanding the physical properties of fluids and gasses in open and closed channels and their use for power transmission and control.
Credits: 3
Coreq: MATH 1200
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCO 1501 - Technical Presentation Students are introduced to Microsoft Office, including Word, Excel, PowerPoint, and FrontPage or other HTML editor, to learn the skills to make presentations, especially for creating an ongoing portfolio of writings, drawings, and all projects and presentations submitted in the classes at SSU, present and future.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCO 1995 - Engineering Tech Portfolio Eval. This course allows for the award of academic credit on the basis of Engineering Technology faculty evaluation of student portfolio or certificate extra-institutional (non-academic) learning. The learning must be within the context of the Engineering Technology degree for which the student is enrolled. The evaluation of student document(s) is by Engineering Technology faculty in the curriculum area in which the student is requesting academic credit.
Note: The course is repeatable to a maximum of five (5) portfolios, or 15 credit hours, whichever is reached first. Credit hours earned by portfolio do not apply toward the residency requirement for graduation.
Credits: 1-3
Prereq: ETCO 1001 or Department Chairperson Approval
|
| |
-
ETCO 2210 - General Industry Safety Introduces industrial safety and occupational health issues, accident prevention, and the OSHA general industry regulations. The course can include the OSHA 10-Hour General Industry Outreach Training Program to the OSHA Directorate of Training and Education Outreach Training Procedures Revised April 2011. This requires the course be instructed by an OSHA-authorized general industry trainer.
Credits: 1
|
| |
-
ETCO 2225 - Indus Mgt/Occup Safety/Health Introduces the attributes and skills necessary to be an effective team builder, communicator, supervisor, or manager necessary for leadership positions in industrial and high technology organizations. Introduces industrial safety, occupational health issues, accident prevention, working conditions, provisions and policies of OSHA. The course can include the OSHA 10-Hour General Industry Outreach Training Program to the OSHA Directorate of Training and Education Outreach Training Procedures Revised April, 2011. This requires the course be instructed by an OSHA-authorized general industry trainer.
Credits: 3
Lecture hours: 3
General Education Program Course GEP (WI)
|
| |
-
ETCO 2280 - Ind Archeology Ohio River Valley Classroom, walking tour, and interactive exploration of the industrial archeology of the Ohio River Valley centered on the Hanging Rock Iron and Coal region in Ohio and Kentucky. Includes the city of Portsmouth, cold and hot blast furnaces of Scioto County and surrounds, foundries, kilns, railroads, canals, and supporting industries. Active historical preservation is also a component of the course.
Credits: 2
|
| |
-
ETCO 2310 - Statics & Strengths Analysis of stress and strain, strength of materials, friction, torsion, and moment of inertia of mechanical structures and displacement in a wide variety of gearing applications.
Credits: 3
Prereq: MATH 1200
|
| |
-
ETCO 2500 - Technology for Everyone Introduction for nontechnology students to the working principles of common devices through lecture, demonstration, and laboratory experience. Topics include the historical origin of common devices, their design principles; the opportunity to use, dissect or assemble basic devices to understand their technology; research on a technical topic involving the development and impact of the technology or commercial device; creation of the successful technology company; and the impact of the technology or device on society.
Credits: 3
|
| |
-
ETCO 2510 - Introduction to Robotics Introduction to robotic applications in industry. Emphasis on classifications, limits of motion, economic impacts, safety and programming of industrial robots.
Credits: 3
Prereq: ETCO 1310 and ETEM 1510
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETCO 2995 - Eng. Tech Portfolio Eval. Cr. II This course allows for the award of academic credit on the basis of Engineering Technology faculty evaluation of student portfolio or certificate extra-institutional (non-academic) learning. The learning must be within the context of the Engineering Technology degree for which the student is enrolled. The evaluation of student document(s) is by Engineering Technology faculty in the curriculum area in which the student is requesting academic credit.
Note: The course is repeatable to a maximum of five (5) portfolios, or 15 credit hours, whichever is reached first. This course is the continuation of ETCO 1995. Credit hours earned by portfolio do not apply toward the residency requirement for graduation.
Credits: 1-3
Prereq: ETCO 1995
|
| |
-
ETCO 2999 - Topics Individual or small group study under the supervision of an instructor of an Industrial and Engineering Technology topic not available to the student by regular or elective courses.
Credits: 1-6
Prereq: Faculty Consent Required.
|
| |
-
ETCO 3185 - Internship in Engineering Tech. Out-of-classroom work experience under the supervision of an Engineering Technology faculty member. The work assignment must be related to your area of interest (Computer Engineering Technology, Digital Simulation and Gaming Engineering Technology, Environmental Engineering Technology, or Plastics Engineering Technology) and may be conducted within business or industry, the public or private sector, state, federal or local government. Level of course credit is based on the scope and responsibilities of the internship.
Credits: 1-4
Lab hours: Determined by instructor
|
| |
-
ETCO 3320 - Ethics/Prof and the Engr Tech Examination and evaluation of the professional issues in differing engineering and technology areas through case studies, codes of ethics (professional canon), the importance of diversity in the workplace, and the need to be able to identify and avoid sexual harassment in any situation. Non-Engineering Technology students are welcome into this course, given that engineering and technology impacts all aspects of 21st century society.
Credits: 1
|
| |
-
ETCO 3999 - Topics Individual or small group study under the supervision of an instructor of an Industrial and Engineering Technology topic not available to the student by regular or elective courses.
Credits: 1-6
Prereq: Faculty Consent Required
|
| |
-
ETCO 4999 - Topics Individual or small group study under the supervision of an instructor of an Industrial and Engineering Technology topic not available to the student by regular or elective courses.
Credits: 1-6
Prereq: Faculty Consent Required.
|
| |
-
ETEC 1101 - Structured Programming An introduction to the software development process through a modern block-structured language. Computer problem solving and program debugging strategies, data abstraction, modularity, parameter passing, and elementary data structures. Fundamentals of linked lists, stacks, and queues. Recursion, recursively-defined data structures, and tree structures will be discussed.
Credits: 3
Prereq: ETCO 1120 (Grade of B or better) OR credit for ETGG 1801
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 1301 - Computer Engineering Technology This course is designed to introduce the student to the computer engineering technology field by providing a classroom experience that is both hands-on and intellectual. The student will be introduced to the fundamentals of computer programming, computer architecture, printed circuit board design and fabrication, electrical and electronic components and electrical-mechanical design.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 1302 - Computing Systems An introduction to operating system installation, and how the lower levels of a computer work. Topics covered in this course may include microprocessors, memory maps, RAM, ROM, I/O, assembly language programming, command line interfaces, hard drive partitioning and formatting, kernel compilation, networks, and servers. 2 lec, 3 lab.
Credits: 3
Prereq: MATH 1200
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 1601 - Graphical User Interface Design This course provides an introduction to graphical user interface programming and teaches the principles and processes for designing good user interfaces and comfortable user experiences. Lab emphasis will be upon developing user interfaces using both scripting languages and visual programming tools.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 2101 - Data Structures Advanced methods for searching and sorting, including hashing techniques. Introduction to complexity analysis. Dynamic data structures such as lists, stacks, queues, trees, heaps, tables, and graphs will be covered in addition to algorithms involving hashing, sorting, recursion and searching. Lab emphasis is upon the implementation of these structures and techniques in complete working structured software applications.
Credits: 3
Prereq: ETEC 1101 or ETGG1803
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 2104 - Object Oriented Programming and Software Engineering The design and development of object oriented programs using a modern object oriented language which includes support for classes, methods, polymorphism, and encapsulation. Introduce models and issues concerned with the development of high quality software including the life-cycle models requirements analysis, specification and design techniques, implementation, documentation, configuration management, reliability, verification, validation, and maintenance.
Credits: 3
Prereq: ETEC 2101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 2110 - Systems Programming The details of direct software-hardware interaction will be examined. Topics include binary number representation, computer arithmetic, indirect memory addressing with pointers, dynamic memory allocation, and references. A systems programming language (such as C or C++) will be used for programming projects in the course.
Credits: 3
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 2301 - Programmable Logic An introduction to logic and interface devices used in microprocessor systems. Boolean logic, Karanaugh maps, and DeMorgan’s theorem are covered in applying LSI devices to systems. Also includes an introduction to Programmable Array Logic (PAL) and Field Programmable Gate Array devices as they are applied to support and augment microprocessor systems.
Credits: 3
Prereq: ETEC 1101 or ETCO 1115
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 2311 - Microprocessor Based Systems The study of microprocessor based systems with a focus on PC hardware and microcontrollers. Topics covered include computer interfacing techniques, signal conditioning, realtime programming and interrupts. Lab emphasis is on interfacing microprocessor based systems to devices in the physical world (such as switches, lights and motors) and developing software that monitors and controls these devices.
Credits: 3
Prereq: ETEC 1302 and ETEC 2301
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 2601 - Database Systems A study of database management systems, including the design, implementation, and maintenance of databases. The logical and physical representations of hierarchical, simple and complex data and file relationships are covered. Their application in the major data models is emphasized with a focus on the relational models.
Credits: 3
Prereq: ETCO 1120 or ETGG 1801
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3201 - Networking and Communication Interfacing a computer system to external devices which support asynchronous and synchronous communications, flow-control paths, data transfer, packets, and physical interfaces. A study of the ISO model protocols, logical connections and services, streams and datagrams, LANs, internetworking, routing, and servers.
Credits: 3
Prereq: ETEC 2101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3301 - Computer Architecture Focuses on microprocessor architectures. Topics include: busses, timing, memory systems, and decoding. Also covered are techniques for interfacing MSI, LSI, and VLSI chips to system busses. Lab emphasis is on building a microprocessor based system.
Credits: 4
Prereq: ETEC 2311
Lecture hours: 3
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3302 - Systems Architecture This course focuses on microprocessor architectures. Topics include: buses, timing, memory systems, and decoding. Also covered are techniques for interfacing MSI, LSI, and VLSI chips to system buses. Lab emphasis is on building a microprocessor based system. Not open to students with credit for ETEC 3301.
Credits: 3
Prereq: ETEC 2311
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3401 - Algorithms This course focuses on the theories of algorithms, data structures, computational complexity, and correctness. Topics covered include: divide-and-conquer techniques, dynamic programming, greediness, sorting, searching, graph problems, lower bound techniques, and NP-completeness.
Credits: 3
Prereq: ETEC 2101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3402 - Automata and Formal Languages The study of formal models of computation in terms of abstract language and machine models. These include formal languages, finite state automata, pushdown automata, Turing machines, and grammars.
Credits: 3
Prereq: ETEC 3401
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3501 - Advanced Circuit Analysis Introduction to (and application of) integral-differential equations to modeling of circuits and systems. Use of a simulation software to model systems. Application of Laplace transforms to system differential equations in the time and frequency domains with sinusoidal and complete harmonic signals. Topics include transfer functions, frequency response, and BODE plots, transients in DC/AC networks, initial conditions, mesh analysis, superposition, the Initial and Final Value Theorems and the Shifting Theorem. A laboratory component is directed at demonstrating the transient effects of both AC and DC stimulus.
Credits: 3
Prereq: ETEM 1111, and MATH 2200 or MATH 2120, or MATH 2300.
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3701 - Operating Systems 1 This course covers the function, design, and integration of the parts of an operating system. Topics covered include: operating system history, policies for scheduling and page-replacement, memory management, resource allocation, deadlock starvation, livelock, access control, mutual exclusion, concurrency process synchronization, file systems, secondary storage management, and command interpreters.
Credits: 3
Prereq: ETEC 2101
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3702 - Operating Systems 2 This course covers advanced operating system topics. Areas covered may include task synchronization and scheduling, memory management and protection, real-time systems, distributed systems, security, file systems, remote system access, and overall system management.
Credits: 3
Prereq: ETEC 3701
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 3901 - Computational Topics: Programming Languages The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Programming Languages.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3902 - Computational Topics: Informatics The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Informatics.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3903 - Computational Topics: Software Design The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Software Design.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3904 - Computational Topics: Circuits and Systems The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Circuits & Systems.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2012 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3905 - Computational Topics: Networking The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Networking.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3906 - Computational Topics: Operating Systems The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Operating Systems.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3908 - Computational Topics: Information Security The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Information Security.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3915 - Computational Topics: Databases & Information Storage The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Databases & Information Storage.
Note: This course may be repeated for credit with instructor permissions
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3916 - Computational Topics: Concurrency The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Concurrency.
Note: This course may be repeated for credit with instructor permission.
Credits: 1-3
Prereq: ETEC 2101 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 3917 - Computational Topics: Computer Architecture The computer field is rapidly changing with constantly emerging hardware and software systems. This class provides the students with an opportunity to explore advanced topics pertinent to their future career. This course will concentrate on topics pertaining to Computer Architecture.
Note: This course may be repeated for credit with instructor permission.
Prereq: ETEC 2010 or ETGG 2801
Lecture hours: 0-3
Lab hours: 0-3
Course/lab fee: $
|
| |
-
ETEC 4301 - Design Lab 1 A capstone experience in Computer Engineering Technology involving the application of hardware and software components to form a system. The student demonstrates competency by applying concepts from the Computer Engineering Technology program to an applications design and implementation project under the guidance of a faculty mentor.
Credits: 3
Prereq: Senior Standing or Instructor Permission
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
General Education Program Course GEP (Capstone)
|
| |
-
ETEC 4302 - Design Lab 2 A continuation of ETEC4301 Design Lab 1 where students complete and present their projects.
Credits: 3
Prereq: ETEC 4301
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 4401 - Compiler Design Application of finite state automata as regular expressions to programming language design and analysis of the use of context-free grammars as a formal device for language syntax. Techniques of lexical analysis and parsing (top-down and bottom-up), symbol table management, code generation, and error handling are covered.
Credits: 3
Prereq: ETEC 3402
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 4501 - Digital Controls 1 A study of the methods used to implement control theory concepts on digital machines. An introduction to measurement devices and physical characteristics of control systems. Lab emphasis is on interfacing sensors used in measuring various physical environments to a microprocessor based system. Signal conditioning, scaling, and real-time programming techniques are incorporated to support these devices.
Credits: 3
Prereq: ETEC 2101, ETEC 2311, ETEC 3501, and MATH 2120
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 4502 - Digital Controls 2 An extension of ETEC 4501. Microprocessor based control systems, open and closed loop systems,block diagrams, PID control algorithms, Programmable Logic Controllers are covered. Lab emphasis ison interfacing microprocessor based systems to actuators such as motors, relays, valves, and heaters. Software algorithms are implemented to create discrete and continuous control systems.
Credits: 3
Prereq: ETEC 4501
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEC 4901 - Perspectives in Computing An opportunity for the student to explore advanced topics pertinent to their future career.
Credits: 3
Prereq: ETEC 3201, ETEC 3301, ETEC 3402, ETEC 3702, and ETEC 3801
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEM 1103 - Industrial Electricity Introduces the student with the National Electric Code (NEC) and practices used in industry to install electrical conductors, switching equipment, and overload protection and equipment. Course study includes motors, generators, and machine controls.
Credits: 2
Lecture hours: 1
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEM 1110 - Electrical Fundamentals 1 (DC) An introductory course in the study of electricity. Basic definitions of energy and electricity are introduced which lead to studies of resistance, Ohm’s Law, series and parallel circuits, magnetism, simple meters, inductance, and capacitance. Direct current effects only.
Credits: 3
Coreq: MATH 1200 or EM Faculty Approval
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEM 1111 - Electrical Fundamentals 2 (AC) Simple inductance-resistance and capacitance-resistance steady-state circuits; studies of alternating current fundamentals, phasor algebra, AC circuit analysis, power factor, and resonance.
Credits: 3
Prereq: MATH 1020 and ETEM1110 or EM Faculty Approval
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEM 1216 - Electronics Introduction to discrete, bipolar solid state electronic devices and electronic circuits, including small signal amplifiers, transistor biasing, equivalent circuits, electronic unregulated DC power supplies; special solid state devices; frequency response; decibels; cascaded, feedback, power and field effect amplifiers; op amps; and regulated DC power supplies.
Credits: 4
Prereq: ETEM 1111 or ETEM 1112
Lecture hours: 3
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEM 1510 - Intro to Electricity/Electronics (CX) Fundamental principles of DC and AC electricity. An introduction to electronics with emphasis on process control applications and PLC’s.
Note: (Not for EM or Computer Engineering Technology majors.)
Credits: 3
Coreq: MATH 1020
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEM 1514 - EM Devices A study of devices where both electrical and mechanical principles are utilized. Includes DC motors and generators, 3 phase circuits, transformers, induction motors, alternators, synchronous motors, and motor controls.
Credits: 3
Prereq: ETEM 1111 or ETEM 1112 (or ETEM 1510 for non-EM majors).
Lecture hours: 2
Lab hours: 3
Course/lab fee: $
|
| |
-
ETEM 2210 - Digital Electronics (PLTW) A course in applied logic that encompasses the application of electronic circuits and devices. Computer simulation software is used to design and test digital circuitry prior to the actual construction of circuits and devices.
Note: This course is a specialization course of study in the Project-Lead-The-Way (PLTW) Ohio Pre-Engineering Program. Course offered upon sufficient demand.
Credits: 4
Prereq: Enrollment in a high school PTLW Ohio Pre-Engineering Program, an Ohio STEM Academy, or instructor approval. Faculty Consent Required.
Course/lab fee: $
|
| |
-
ETEM 2212 - Digital Logic Introduction to solid state, integrated electronic logic, practical applications of Boolean Algebra, logic gates, binary pulse circuits, number systems, and computer arithmetic. Integrated circuit applications which include combinational and sequential logic, printed circuits, counters, registers, decoders, signal converters, and an introduction to microcomputers.
Credits: 4
Prereq: ETEM 1216
Lecture hours: 3
Lab hours: 3
Course/lab fee: $
|
| |
Page: 1 <- 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
| 13
-> 16 |
Print this Page