| |
| |
-
ETEM 2418 - Programmable Logic Controls Credits: 3
Introduction to basic industrial control circuits using the PLC as a control device. Instruction on the proper methods of programming, logic and math functions, and interfacing the PLC to peripheral devices. Prereq: ETEM 1510, or ETEM 2212 or ETEM 1514 2 lecture hours 3 lab hours $
|
| |
-
ETEM 2420 - Programmable Controllers 2 Credits: 3
Continuation of ETEM 2418 including more advanced controls, interfacing, and peripheral devices. Prereq: ETEM 2418 2 lecture hours 3 lab hours $
|
| |
-
ETEM 2514 - EM Systems Credits: 4
An introduction to systems which use both electrical and mechanical principles. Thermals, hydraulic, pneumatic, vacuum, magnetic, and optical systems are utilized to stress the coordinated combination of previously learned concepts. Includes the use of mechanical drawing of both electrical and electronic circuits and components using appropriate symbols. This course covers power distribution, logic and ladder diagrams, printed circuits, schematics, and pictorial views. Prereq: ETCO 1310, ETEM 1216, and ETEM 1514 3 lecture hours 3 lab hours $
|
| |
-
ETEM 2516 - Automation/Robotics Credits: 3
A study of electromechanical open and closed loop analog and digital systems. The microcomputer and programmable logic controllers are used to interface a variety of input and output transducers to build complete automatic control systems and industrial robotic manufacturing cells. Prereq: ETCO 1310, ETEM 1514, and ETEM 2212 2 lecture hours 3 lab hours $
|
| |
-
ETEM 2520 - EM Design/Presentation Credits: 3
Provides the student the opportunity to work on the design, fabrication, assembly, and testing of electromechanical devices and systems. Promotes independent study, team building, initiative, and creativity by requiring the student to develop the design with minimal staff supervision. Students are required to make a formal oral presentation of their design project. Prereq: ETEM 2516 2 lecture hours 6 lab hours $
|
| |
-
ETEV 1110 - Intro to Environmental Engr Credits: 3
An introduction and overview of the management of environmental restoration and pollution control projects. The development of an appreciation of the many aspects of project coordination. Problem discovery and definition, investigative techniques, work plans, health and safety plans, quality assurance/quality control plans, agency interfacing/permit acquisition, legal regulations and reporting requirements are discussed. 2 lecture hours 3 lab hours $
|
| |
-
ETEV 1120 - Laboratory Techniques Credits: 3
A specialized laboratory chemistry course for water/wastewater, air, and solid waste analysis. Course includes collection of samples, appropriate sampling protocols, and records keeping for such tests as heavy metals, F/M ration, sludge age, fecal coliform, BOD, suspended solids, percent solids, ammonia, chlorine demand, and residual, pH, turbidity, etc. Prereq: CHEM 1141 and ETEV 1110 2 lecture hours 3 lab hours $
|
| |
-
ETEV 1130 - Water Treatment Techniques Credits: 3
Designed to provide the necessary formal training to allow the student to attempt the State of Ohio Class I Water Operator exam. Emphasizes water treatment, distribution systems, theory of operations, and design applications. Basic water quality tests such as chlorine residual, fluoride, iron, manganese, and nitrate niterogen are also covered. Prereq: CHEM 1141 2 lecture hours 3 lab hours $
|
| |
-
ETEV 2210 - Wastewater Treatment Techniques Credits: 3
Provides the necessary formal training to allow the student to attempt the State of Ohio Class I Wastewater Operator exam. Emphasizes types of treatment, theory of operation, design applications, basic operating tests such as BOD, DO, pH, F/M ration, sludge age, detention timing, hygiene and public health aspects, sewer systems, and budgetary considerations. Prereq: CHEM 1141 2 lecture hours 3 lab hours $
|
| |
-
ETEV 2220 - Hazardous Waste Management Credits: 3
An investigation of the state and federal programs for environmental assessments of regulating facilities for the disposal of hazardous wastes and the development of resource recovery programs. The creation, transportation, treatment methods, storage, and disposal of “hazardous wastes” are also studied. Prereq: CHEM 1141 and ETEV 1110 2 lecture hours 3 lab hours $
|
| |
-
ETEV 2230 - Intro to Solid Waste Mgt Tech Credits: 4
A study of the long-term environmental impacts, methods of transporting, reduction, and storage of solid waste. Prereq: CHEM 1141 and ETEV 1110 and MATH 2110 or MATH 2111
|
| |
-
ETEV 2240 - Industrial Waste Treatment Credits: 3
A study of industrial waste pretreatment requirements, equipment operation and design, testing, and removal systems. Prereq: CHEM 1141 and ETEV 2220 2 lecture hours 3 lab hours $
|
| |
-
ETEV 2250 - Fluid Mechanics Credits: 3
Fluid properties; fluid statics, including manometry; submerged surfaces; buoyancy; and stability of floating bodies. The principles of fluid flow, including Bernoulli’s and energy equations; energy losses; and pump power. Analysis and design of pipeline systems, open channels, and pump selection. Prereq: PHYS 2201 and MATH 1200 2 lecture hours 3 lab hours $
|
| |
-
ETEV 2260 - Automation/Environmental Tech Credits: 3
Complete closed-loop control of analog process systems with PLC interfaces and computer control. Several loops are analyzed, such as flow, chemical feeds, temperature, and dissolved oxygen. Prereq: ETEV 1120, and ETEV 1130, and ETEV 2210, and MATH 1200 2 lecture hours 3 lab hours $
|
| |
-
ETEV 2270 - Industrial Toxicology Credits: 3
A study of the health and safety issues of hazardous and infectious environments. Exposure limits, monitoring, symptoms, and prevention of the spread of common diseases through all forms of waste management are discussed. Prereq: CHEM 1141 and ETEV 2220 2 lecture hours 3 lab hours $
|
| |
-
ETEV 3310 - Thermodynamics Credits: 3
Energy analysis of engineering systems using the concepts and laws of thermodynamics. The principle of the mechanical equivalent of heat, behavior, or pure substances, uses of thermodynamic property tables, and study of gas mixtures. Application of the Carnot cycle to both heat engines and reversed heat engines. Prereq: ETEV 2250 and MATH 2110 or MATH 2111
|
| |
-
ETEV 3345 - Management of Hazardous Material Credits: 3
Focuses on the handling, storage, transportation and accident prevention aspects of hazardous materials management. Key EPA, DOT, manifesting, and other handling/shipping concerns. Prereq: ETEV 2220 2 lecture hours 3 lab hours $
|
| |
-
ETEV 3355 - Hazard Waste Treat/Control Tech Credits: 3
Provides statistical and numerical techniques to analyze environmental monitoring data required for regulatory compliance. Applications include groundwater, soil, air, and others as appropriate. Prereq: CHEM 1141 and ETEV 2220 and MATH 2110 or MATH 2111 2 lecture hours 3 lab hours $
|
| |
-
ETEV 4410 - Engr Hydrology for Technologists Credits: 3
An overview of basic groundwater hydrology, groundwater flow systems, well design, and groundwater management. Emphasis is placed on the environmental aspects of groundwater development and management. Prereq: CHEM 2200 and MATH 2110 or MATH 2111 2 lecture hours 3 lab hours $
|
| |
-
ETEV 4420 - Intro to Geographic Info Systems Credits: 3
Introduction to the use of computer aided drafting techniques to document municipal, utility, and governmental information in a graphics format. Prereq: GEOL 1201 or GEOL 112 2 lecture hours 3 lab hours $
|
| |
-
ETEV 4430 - Stat Proc Analysis Environ Data Credits: 3
Provides statistical and numerical techniques to analyze environmental monitoring data required for regulatory compliance. Applications include groundwater, soil, air, and other as appropriate. Prereq: ETEV 2220, and ETEV 2270 and ETEV 3355 2 lecture hours 3 lab hours $
|
| |
-
ETEV 4440 - Environmental Law and Policy Credits: 3
A study of American political institutions and a brief history of the American environmental movement and the resulting environmental regulations. Emphasis is on NEPA, RCRA, CERCLA, EPCRA, CAA, CWA, SDWA, HMTA, TSCA, FIFRA, the Clean Water Act, the Clean Air Act, and the Asbestos Hazard Emergency Response Act. Prereq: ETEV 1130 and ETEV 2220
|
| |
-
ETEV 4445 - Hazardous Site Remediation Credits: 3
This course provides a wide spectrum of remediation-based technologies that have been employed in the successful remediation of Superfund sites. Technologies will include physical, chemical, thermal and bioremediation applications. Different site conditions will be considered in terms of technology applicability with regard to processing efficiencies and mass capabilities. Prereq: CHEM 2200, ETEV 2220, and ETEV 3355 2 lecture hours 3 lab hours $
|
| |
-
ETGG 1801 - Game Programming Foundations 1 Credits: 3
This course introduces students to the rigorous field of interactive simulation and gaming. Students learn about the major components of modern simulations and games from both a design perspective and a technical perspective. Topics covered include: fundamentals of simulation/gaming, user interface design, human computer interaction, input/output paradigms, and an overview of simulation/game design process. Lab activities are designed to foster critical thinking and problem-solving skills through the development of an understanding of the development process as well as interactive programming techniques through the creation of working interactive programs in a high-level programming language. Coreq: MATH 1300 2 lecture hours 3 lab hours $
|
| |
-
ETGG 1802 - Game Programming Foundations 2 Credits: 3
This class is a continuation of ETGG 1801 and is intended to further develop the students’ understanding of the simulation/gaming production and implementation process. Class activities are focused upon understanding of more advanced concepts and implementation techniques central to the game and simulation development process. Lab activities are focused upon the writing of simple, yet complete, interactive programs in a high-level programming language. Prereq: ETGG 1801 2 lecture hours 3 lab hours $
|
| |
-
ETGG 1803 - Concepts of 3D Graphics & Math Credits: 3
This course introduces students to concepts of 3D graphics, 3D modeling, and the mathematics necessary for 3D programming. Topics covered include: 3D model generation and texture generation, 3D trigonometric operations, 3D vector motion, and matrix transformations in 3-space. Lab activities focus upon creating textures and models and learning the mathematical principles that underlie the computer graphics field. Prereq: ETGG 1801 2 lecture hours 3 lab hours $
|
| |
-
ETGG 2801 - Computer Graphics 1 Credits: 3
This course is intended to provide a rigorous introduction to 2D and 3D computer graphics concepts, techniques, and algorithms. Topics covered may include point plotting, line drawing, clipping, sprite animation, optimization, projection, shading, transformations, and other topics. Lab activities will include programming projects in two and three dimensional graphics varying from simple to complex. Prereq: ETGG 1803 Coreq: ETEC 2101 2 lecture hours 3 lab hours $
|
| |
-
ETGG 2802 - Computer Graphics 2 Credits: 3
This class is a continuation of ETGG2801 and is intended to provide advanced mathematical concepts, techniques, and algorithms for 3D computer graphics. Topics covered may include texture mapping, curves and surfaces, image processing, alpha-blending, bump mapping, anti-aliasing, pixel-shaders, volumetric lighting, and other topics. Lab activities will include various programming projects using a modern 3D graphics API. Prereq: ETGG 2801 2 lecture hours 3 lab hours $
|
| |
-
ETGG 3801 - Realtime Interactive Prog. 1 Credits: 3
Realtime Interactive Programming is a two-semester sequence that puts into practice all of the information and knowledge gained in the previous courses. In this sequence the students first identify, then build, the necessary components for a full working 3D simulation/game engine. ETGG3801 lab activities focus upon investigating existing 3D engines and then designing and implementing simple simulations/games upon a modern 3D engine. Prereq: ETGG 2802 2 lecture hours 3 lab hours $
|
| |
-
ETGG 3802 - Realtime Interactive Prog. 2 Credits: 3
This class is a continuation of ETGG 3801. ETGG 3802 classroom and lab activities focus upon the creation of a custom programmed 3D engine that encompasses advanced 3D engine features such as physics modeling, special effects, sound effects, and advanced I/O and interface routines. Prereq: ETGG 3801 2 lecture hours 3 lab hours $
|
| |
-
ETGG 4801 - Senior Project 1 Credits: 3
The two-semester senior project sequence is intended to be the capstone experience in Interactive Simulation and Gaming Engineering Technology. The project experience will synthesize previously covered techniques by allowing the students to design and develop and entire simulation/game project. The students will, under the guidance of faculty mentors, take a complete project from idea to proposal to development to product in a diverse team environment. The project sequence culminates with the completion and formal presentation of a completed working interactive 3D simulation/game. Prereq: ETGG 3802 1 lecture hours 6 lab hours $
|
| |
-
ETGG 4802 - Senior Project 2 Credits: 3
Continuation of ETGG 4801. Prereq: ETGG 4801 1 lecture hours 6 lab hours $
|
| |
-
ETGG 4803 - Artificial Intelligence Credits: 3
This course provides an introduction to the fundamental concepts and techniques underlying the construction of artificially intelligent computer systems. Topics covered may include: problem-solving and search; logic and knowledge representation; planning; reasoning and decision-making in the presence of uncertainty; machine learning; natural language processing; neural networks; and other topics. Lab activities will focus upon the design and implementation of working AI systems. Prereq: ETEC 3402 2 lecture hours 3 lab hours $
|
| |
-
ETGG 4804 - Optimization Techniques Credits: 3
This course is designed to teach students advanced programming techniques designed to achieve increased code performance. Course content includes both algorithmic optimization techniques as well as hardware optimization techniques. Lab activities focus upon hands-on, real-world code optimization exercises using both low-level and high-level programming languages. Prereq: ETGG 2801 2 lecture hours 3 lab hours $
|
| |
-
ETGG 4805 - Perspect Interactive Simulation Credits: 3
The computer simulation and gaming field is rapidly changing with constantly emerging technologies and techniques. This class provides the student with an opportunity to explore advanced topics pertinent to their future career. Prereq: ETGG 3802 2 lecture hours 3 lab hours $
|
| |
-
ETPL 1100 - Plastics Manufacturing Credits: 3
An introductory overview of the different plastic resins, processing methods, and terminology. Lectures cover different types of plastic, identification tests, polymerization, molecular growth, and processing methods. Laboratory experiences in extrusion, injection, thermoforming, compression, and other molding and fabricating operations. 3 lecture hours $
|
| |
-
ETPL 1120 - Software Tools for Technology Credits: 3
Utilization of computer hardware and a high level programming application (Mathcad) to create worksheets, functions, 2D and 3D plots, graphics and interactive operations to develop computer programs for technology applications. 3 lecture hours $
|
| |
-
ETPL 2200 - Plastics Processing 1 Credits: 4
Basic topics in the processing of thermoplastic resins. Basic topics in extrusion processing. Hands-on operation in the study of the extrusion of thermoplastic resins. Hands-on operation of injection molding machines and introduction to principles of injection molding processing of thermoplastics. Prereq: ETPL 1100 3 lecture hours 3 lab hours $
|
| |
-
ETPL 2220 - Plastics Processing 2 Credits: 4
The study of control systems. Basic PLC controls and P, PI, PID controller will be studied as it relates to the plastics industry. Prereq: ETPL 1100 3 lecture hours 3 lab hours $
|
| |
-
ETPL 2230 - Properties of Polymers 1 Credits: 4
Introduction to the molecular structures, molecular mass distributions, tacticity, thermal transitions, and morphology of commercial, synthetic polymers, and their relationships to properties (from an applications standpoint). Describes the polymerization mechanisms; step and chain growth, plus the industrial processes utilized for the manufacture of polymers; bulk, suspension, dispersion, interface, and emulsion, including the mechanisms of the current catalyst systems; Ziegler-Natta and metallocene. Extensive coverage of both the amorphous and crystalline states is provided. The visoelastic characteristics of polymers are explained and modeled. The curing kinetics of thermoset polymers will be investigated. The lab component includes the characterization and testing of polymers, using differential scanning calorimetry and capillary rheometry, plus the Instron and Izod Impact testing machines. Prereq: CHEM 1142 and MATH 2120 Coreq: PHYS 2202 3 lecture hours 3 lab hours $
|
| |
-
ETPL 2235 - Stat Process/Quality Control Credits: 4
Introduction to basic statistical theory; probability models for discrete and continuous random variables; their probability distributions and probability density functions. Sampling distributions for the mean, variance and ratios of variances. Hypothesis testing of means, variance, proportions, differences between means, and ratios of variances. The development and analysis of control charts for variables and attributes. Linear regression theory. Application of Taguchi’s 2-level designed experiments to polymer processing. Prereq: MATH 2110 $
|
| |
-
ETPL 3320 - Plant Layout and Cost Analysis Credits: 4
Fundamentals of engineering economics and financial management for engineering technologists as applied to the production and manufacturing environment. Topics include principles of plant layout and facilities design, and related economic decisions, time value of money, evaluation of assets, cash flow, replacement decisions, and rate of return analysis. Prereq: MATH 1200 $
|
| |
-
ETPL 3330 - Properties of Polymers 2 Credits: 4
Introduces atomic packing factors, crystal structures, Bravais lattices, and unit cells. Briefly explains chemical thermodynamic concepts; entropy; Gibbs and Helmholtz free energy, and applies these to the entropic theory of rubber elasticity. The theory for computing the stress distribution in fibre-reinforced polymer composites (FRPCs) is developed, allowing prediction of their properties. Provides the van der Waals interaction potentials required to understand intermolecular forces, and interactions between particles. Introduces the Young-Laplace equation, plus Gibbs’ concept of an interface, in order to explain capillarity, and other interfacial phenomena. Develops the basic concepts of 2-D stress analysis in order to describe failure mechanisms of polymers and composites. Investigates the structure and properties of the thermoplastic elastomers and developing polymers. Prereq: ETPL 2230 and MATH 2120 $
|
| |
-
ETPL 3335 - Stat Process/Quality Control 2 Credits: 4
Analysis of variance and the basic theory of experimental design: completely randomized, randomized block and Latin Square designs. Factorial and fractional factorial designs, with application to polymer processes. Multiple linear regression, using matrix methods. Optimization theory with applications to polymer processing. Acceptance sampling techniques; operating characteristic curves. The testing and evaluation of product reliability. Introduction to the concepts of linear programming: the Simplex method will be applied to the solution of transportation and assignment problems, plus network flow models. PERT/CPM techniques, probabilistic (Bayesian) models, and decision trees. Prereq: ETPL 2235 $
|
| |
-
ETPL 3345 - Advanced Processing 1 Credits: 4
Application of the laws of conservation (mass, momentum, energy) to polymer processing: Using fluxes and differential volume elements yields the 1-D, steady-state transport equations. Steady-state flows in simplified geometries; within circular cross-sections; between parallel plates. Explores the phenomena occurring in the three sections of a single-screw extruder. Application of the power law model to more accurately describe the rheological behavior of polymers in continuous polymer processing operations: wire coating, pipe, profile, cast and blown film, plus calendering (to form sheet). Prereq: ETPL 1100 and ETPL 2230 $
|
| |
-
ETPL 3360 - Plastic Part and Mold Design Credits: 4
Study of thermoplastic and thermoset part designs. Assigned projects develop an understanding of design parameters. Emphasis is placed on combining several areas of knowledge to design plastic parts. Design and analysis of plastic parts made using thermoplastic injection molds, extrusion dies, and blow molding using Moldflow Design and Analysis and CAD programs. Includes geometric dimensioning, cams, and other special techniques. Prereq: ETPL 2200 and ETPL 2230 4 lecture hours $
|
| |
-
ETPL 3370 - Plastic Part and Mold Design 2 Credits: 4
Continuation of ETPL 3360. Prereq: ETPL 3360 4 lecture hours $
|
| |
-
ETPL 4445 - Advanced Processing 2 Credits: 4
Applies the theory developed in ETPL 3345 to unsteady-state (cyclic) polymer processes: blow-, injection-, rotational- and compression molding, plus thermoforming. Explores unsteady-state heat transfer in injection-, rotational-, and blow molding, and elongational flows (fibre spinning). Revisits the blown film and blow-molding processes in greater depth. Introduces additional concepts in stress analysis; the mechanical behavior of shells; bending of beams, and applies these to the prediction of the mechanical behavior of polymers in a variety of applications, including snap fit connections. Prereq: ETPL 3345 $
|
| |
-
ETPL 4470 - Part and Mold Making and Foams Credits: 4
Capstone design class for the plastic curriculum. Students learn CNC programming and basic knowledge to construct a mold for a plastic part. Mold is constructed for design developed and analyzed in ETPL 360, ETPL 365, and ETPL 370. Study of assembly, machining, and molding of plastic parts. Also covered will be the processing of plastic foams. Topics include fundamentals of foaming plastics; extruded foams; EPS; polyurethane foams; the Mucell Process. Prereq: ETPL 3370 4 lecture hours $
|
| |
-
ETRO 2530 - Robotic Maintenance Credits: 3
Instruction in servicing and troubleshooting robotic and peripheral automated systems. Emphasis on the mechanical, hydraulic, and electronic control systems associated with robotic work cells. Prereq: ETEM 2418 and ETEM 2516 or ETCO 2510 and ETEM 1510 2 lecture hours 3 lab hours $
|
| |
-
ETRO 2540 - Robotic Applications Credits: 3
Advanced study in high technology robot operations and applications with emphasis on pick and place, continuous, and controlled path robots, programmable logic control systems, and production systems. Extended practice in off-line programming, set-up, adjustment, and operation of robotic work cells and material handling systems. Prereq: ETRO 2530 2 lecture hours 3 lab hours $
|
| |
-
FREN 1111 - Elementary French 1 Credits: 5
Beginning course of a two-semester, first-year sequence. Basic grammatical concepts and patterns. Emphasis is on development of reading, listening, comprehension, speaking, and writing skills. $ GEP
|
| |
-
FREN 1112 - Elementary French 2 Credits: 3
Continuation of FREN 1111. Prereq: FREN 1111 $ GEP
|
| |
-
FREN 2211 - Intermediate French 1 Credits: 3
An intensive review of grammar and sentence structure and introduction to selected readings in French literature. Oral expression is stressed. Prereq: FREN 1112 $
|
| |
-
FREN 2212 - Intermediate French 2 Credits: 3
Continued intensive review of grammar. Sight translation is stressed. Conversational drills include advanced idiomatic expressions. Prereq: FREN 2211 $
|
| |
-
GEOG 1125 - World Geography Credits: 3
Concerns world’s regions and nations, resource use, cultural groups, and political patterns. Designed to develop an understanding of world affairs and the applications of geography in general.
|
| |
-
GEOG 1130 - Economic Geography Credits: 3
Systematic survey of locational economic patterns and their interrelationships.
|
| |
-
GEOG 2201 - Cultural Geography Credits: 3
Impact of various cultures on landscape, distribution of cultural traits, ecological adaptations, and cultural areas throughout the world. Prereq: ENGL 1105 $ GEP
|
| |
-
GEOG 2225 - Physical Geography Credits: 3
Systematic survey of earth-sun relationships, land forms, climate, soils, and natural vegetation. $
|
| |
-
GEOG 2227 - Foundations of Meteorology Credits: 3
A survey of the principles and elements of meteorology: composition of the atmosphere, radiation balance, precipitation, global ciriculation, weather systems and traveling cyclones, weather forecasting, and air pollution and human impacts on local and global climate.
|
| |
-
GEOG 2230 - Urban Geography Credits: 3
Study of city function, patterns, and past and current problems confronting the city, including planning, zoning, housing, and urban renewal.
|
| |
-
GEOG 2243 - Geography of Appalachia Credits: 3
A study of Appalachia from a geographical approach, including a detailed examination of physical aspects (climate, soil, vegetation, minerals, and water resources), historical development both past and present, settlement patterns, and economic patterns of the region.
|
| |
-
GEOG 2999 - Topics in Geography Credits: 1-3
Individual or small-group study, under the supervision of instructor, of topics not otherwise available to students. Separate courses, repeatable for credit. Prereq: GEOG 1125, or GEOG 1130, or GEOG 2201
|
| |
-
GEOG 3310 - Medical Geog:Geog of Life/Death Credits: 3
Relationship between disease and the physical and socio-economic environment. Topics include disease ecology, historical patterns of cholera and plague, tropical disease, weather and health, cancer and heart disease in the U.S., hunger and the environment, distribution of resources, and introduction to facilities location planning.
|
| |
-
GEOG 3311 - Air Pollution Credits: 3
Examination of air pollutants and their social and economic impacts, control strategies, and air pollution planning.
|
| |
-
GEOG 3350 - Reg Geog:Geog of North America Credits: 3
The U.S. and Canada studied from a geographical perspective, including detailed examination of climate, soil, vegetation, minerals, water resources, historical development, settlement patterns, and economic aspects of the region. $
|
| |
-
GEOG 3351 - Reg Geog of the Middle East Credits: 3
The Middle East–a cradle of civilization, birthplace of three world religions, crossroads, oil resource area, site of persistent conflict since WWII. The course addresses these aspects within the context of regional geography. Prereq: ENGL 1105 or ENGL 1107 GEP
|
| |
-
GEOG 3357 - Regional Geography: Ohio and Environs Credits: 3
Detailed study of the physical and human geography of the state of Ohio and neighboring parts of Indiana, Kentucky, Pennsylvania, West Virginia, and Michigan, focusing on the area from the Ohio Valley to the Great Lakes. The various facets (agricultural, urban, and industrial) of the region are examined through multimedia presentations. Prereq: 3 hours in Geography
|
| |
-
GEOG 3360 - Regional Geography: American Great Plains Credits: 3
Detailed study of the physical and human geography of the American Great Plains. The splendor, majesty, and starkness of the landscape and the variety of cultural and economic activities of the Great Plains are examined through multimedia presentations. Prereq: Completion of 3 credit hours in Geography
|
| |
-
GEOG 3999 - Special Topics in Geography Credits: 1-3
Individual or small-group study, under the supervision of instructor, of topics not otherwise available to students.
|
| |
-
GEOG 4404 - Transportation Geog/Management Credits: 3
Examination of the geography of transport routeways and the geographic factors governing their evolution and use. Various modes (e.g. rail, water, highway) are discussed in terms of facilities, environmental impacts, rate structures, and commodities shipped. Decision processes of shippers, carriers, and government are examined. Prereq: One course in GEOG or ECON
|
| |
-
GEOG 4999 - Special Topics in Geography Credits: 1-3
Individual or small-group study, under supervision of instructor, of topics not otherwise available to students. Separate courses are repeatable for credit. Prereq: GEOG 1125, or GEOG 1130, or GEOG 2201
|
| |
-
GEOL 1201 - Physical Geol/Human Environment Credits: 4
Introduction to Earth materials and the processes that shape the Earth’s surface. Emphasis on key theories which guide our explanations of geologic phenomena, and on the complex interrelationships between geologic systems and humankind. 3 lecture hours 2 lab hours $ GEP
|
| |
-
GEOL 1202 - Historical Geology Credits: 4
Biological and physical history of the Earth. Course focuses on principles that have guided geologists in their search for clues to the Earth’s past. Students will trace the Earth’s history from the development of the crust, oceans, and atmosphere to the appearance of life and domination of dinosaurs and mammals. Prereq: GEOL 1201 3 lecture hours 2 lab hours $ GEP
|
| |
-
GEOL 2203 - Mineralogy Credits: 4
Systematic study of minerals that constitute the Earth. Classification, occurrence, and identification of silicate/nonsilicate minerals. Course builds a foundation for the study of advanced Earth materials and processes. Prereq: CHEM 1141 and GEOL 1201 3 lecture hours 2 lab hours $
|
| |
-
GEOL 2204 - Sedimentary Rocks/Stratigraphy Credits: 4
Study of the origin and characteristics of sediments and sedimentary rocks. Course traces the development, transport, deposition, and lithification of sediments; and examines the classification, distribution, and interpretation of sedimentary rocks and environments. Prereq: GEOL 2203 3 lecture hours 2 lab hours $
|
| |
-
GEOL 2290 - Seminar in Geology Credits: 1-4
Discussion of advanced topics in Geology.
|
| |
-
GEOL 2295 - Undergraduate Research Credits: 1-4
Independent Earth Science investigation under the direction of a faculty member. Prereq: Instructor permissions only. $
|
| |
-
GEOL 2999 - Topics in Geology Credits: 1-4
Individual or small-group study, under the supervision of instructor, of topics not otherwise available to students.
|
| |
-
GEOL 3100 - Field Studies in Reg. Geology Credits: 1-4
Intensive study, analysis, and interpretation of sites and regions of geological significance. Offered as extended field trips. Students may earn a maximum of 8 credits of GEOL 3100. Prereq: GEOL 1201 and Faculty Consent Required
|
| |
-
GEOL 3205 - Igneous/Metamorphic Petrology Credits: 4
Study of the occurrence, origin, composition, structure, and evolution of igneous and metamorphic rocks. Physical and chemical classification of rocks based upon mineralogy and textures. Introduction to thin-section petrography. Prereq: GEOL 2203 3 lecture hours 2 lab hours $
|
| |
-
GEOL 3301 - Paleobiology Credits: 4
Study of common and important fossil-forming invertebrates. Objectives are to understand how fossils are generated, why they are important, and how they can help us to understand the diversity of life today. Vertebrate-invertebrate relationships are also considered. Prereq: GEOL 1202 3 lecture hours 2 lab hours $
|
| |
-
GEOL 3390 - Seminar in Geology Credits: 1-4
Discussion of advanced topics in Geology.
|
| |
-
GEOL 4206 - Structural Geology/Tectonics Credits: 4
Study of the principles and causes of deformation of the Earth’s lithosphere. Recognition and analysis of primary and secondary structural features and their bearing on theories concerned with the origin and development of major landscape features, continents, and ocean basins. Prereq: GEOL 2204, GEOL 3205, and PHYS 2201 3 lecture hours 2 lab hours $
|
| |
-
GEOL 4207 - Field Methods Credits: 4
Course is designed to introduce students to the theory, techniques, and equipment of geologic mapping. Students complete a series of field projects that are based on themes in environmental and economic geology. Prereq: GEOL 4206 or instructor permission. 2 lecture hours 5 lab hours $
|
| |
-
GEOL 4211 - Field Methods 1 Credits: 2
Introduction to the theory, techniques, and equipment of geologic note-taking, field measurement and mapping through a series of field projects. Prereq: GEOL 2204 and GEOL 4206 or instructor permission 2 lecture hours 5 lab hours $
|
| |
-
GEOL 4311 - Hydrology Credits: 4
Study of the occurrence, distribution, movement, and chemistry of water at and near the Earth’s surface. Characterization of aquifer materials and methods for determining groundwater flow directions and velocities. Consideration of exploitation and degradation of water resources. Prereq: GEOL 1201 and MATH 2110 3 lecture hours 2 lab hours $
|
| |
-
GEOL 4486 - Senior Project Credits: 1-4
In-depth study of a selected topic in Geology culminating in the completion of a research paper. Prereq: Senior Only and faculty consent required. $
|
| |
-
GEOL 4491 - Seminar in Geology Credits: 1-4
Discussion of advanced topics in Geology.
Prereq: Junior or Senior standing.
|
| |
-
GEOL 4495 - Undergraduate Research Credits: 1-4
Independent Earth Science investigation under the direction of a faculty member. Prereq: Junior or Senior Standing and Instructor Permission. $
|
| |
-
GEOL 4999 - Special Topics in Geology Credits: 1-4
Individual or small-group study, under the supervision of instructor, of topics not otherwise available to students. Prereq: Junior or Senior Standing.
|
| |
-
GOVT 1101 - National Government Credits: 3
An analysis of the constitutional basis and development of American politics in light of classical democratic theory and contemporary practices; emphasis on the structures, processes, and functions of the national government.
|
| |
-
GOVT 2240 - Contemp Political Ideologies Credits: 3
Surveys major political theories, movements, and regimes and how they shape attitudes, beliefs, and political practice of societies across the world.
|
| |
-
GOVT 2250 - Intro to Political Science Credits: 3
This course, required for all Social Science majors, explains the fundamentals of the field of political science and offers introductory treatments on the four subfields of the discipline (i.e. political theory, comparative politics, international relations, and American government). GEP
|
| |
-
GOVT 2999 - Topics in Government Credits: 1-3
Individual or small-group study, under the supervision of instructor, of topics not otherwise available to students. Repeatable for credit.
|
| |
-
GOVT 3310 - United States Foreign Policy Credits: 3
The conceptual bases underlying the development of post-World War II foreign policy, its changing concerns, and its various modes of policy implementation in selected cases and geographic areas (e.g., the Cold War, the Third World, and North/South issues).
|
| |
-
GOVT 3320 - Third World Politics Credits: 3
The individual and collective study of the causes of development and underdevelopment, crisis politics, and the prospects for the future of nations in Asia, Latin America, and Africa. Prereq: ENGL 1105 and either GOVT 2250 or HIST 1140 GEP
|
| |
-
GOVT 3330 - Mass Media Politics Credits: 3
A study of the globalization of the media and its effects on local, national, and international politics; economics; and socialization processes in the United States and other nations.
|
| |
-
GOVT 3340 - European Politics Credits: 3
Examines the historical, political, and economic realities of selected nations from an individual and a cross-national perspective with additional attention to the current European Economic Community’s supranational integration development process.
|
| |
-
GOVT 3350 - National Policy Issues Credits: 3
Study of the politics of policy formation and implementation by the national government in selected areas (e.g. foreign policy, welfare, political economy, and environment). Coreq: GOVT 2250
|
| |
Page: 1 <- 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
| 13
|
Print this Page